| For current pricing and to order Click Here |
Quick Change Tool Post
Two dovetails so you can switch from
turning to boring/facing without any tools or changes to your setup
QCTP machined from billet 6061 T6 Aluminum
Hard Anodized for durability and appearance
No tools required to change bits
Versions to fit Sherline, Taig, Unimat,
Atlas and 7x10-12, 9x20 and most small lathes
Additional tool holders available
Inline handle for added strength
Optional 1/2" boring holder available
Price $89.95 complete kit with 4 holders
Additional Holders & Accessories:
Standard stick tool holder
3/8" boring bar holder
1/2" boring bar holder
1" x 1" silver blank holder
cut off blade holder
USA made .040 x 1/2" cut off blade
See a review at www.Mini-Lathe.com |
|
 |
| Tuff
Nuts T-Nuts Custom Designed Steel Tnuts
Machine Specific versions for:
Sherline
Lathe or Mill
Sherline
Lathe Toolpost
Taig Mill
Taig Lathe
Chinese
MiniMill
Chinese
9x20 Lathe
Black Oxide finish.
Lifetime warranty
Stronger then stock
USA made
|
Sherline Tnut
|
|
 |
|
Sherline Extended Toolpost Nut
|
|
 |
|
|
Taig Nut |
|
 |
| 4 Bolt Compound Hold Down 9x20
Lathe Precision machined from steel
black oxide finished.
Fits most Chinese 9x20 lathes.
|
|
 |
| T Slot Cleaner Laser
machined from Delrin
specifically designed for Taig, Sherline
and Chinese Mills
|
|
 |
| Sherline Tool Post Riser Block
Allows our QCTP to be used on your Sherline
when you use a headstock riser
Dual T-nut mount to cross slide
Upgraded 1/4-20 tool post mount bolt and
mount sleeve included
Can also be used with stock Sherline tool
posts
Includes Sherline T-nuts and mounting
hardware
|
|
|
Endmill holder for Taig
& Sherline mills Specific version for
correct fit on each brand
7/8" machinedhex for easy remove
Precision machined for accuracy
Made from 12L14 steel for strength
Black oxide finish for rust resistance
Available in 1/2", 3/8", 5/16', 1/4",
3/16", 1/8", 3mm
Perfect for CNC to allow tool length
compensation
|
|
 |
Endmill
holder for ER16 Spindle
1"
machinedhex for easy remove
Precision machined for accuracy
Made from 12L14 steel for strength
Black oxide finish for rust resistance
Available in 1/2", 3/8", 5/16', 1/4",
3/16", 1/8", 3mm
Perfect for CNC to allow tool length
compensation
|
|
|
| Blank arbors for Taig
& Sherline mills Specific version for
correct fit on each brand
7/8" machined hex for easy remove
Made from 12L14 steel for strength
Available in long and short version
|
|
 |
Long Travel Table for Sherline
Mill 14+ inches of travel, 19" total table length
Made from cast aluminum tooling plate for
stability
1" thick for extra strength
Hard anodized finish for durability
Tapped mounting holes for manual or CNC
installation
Includes a replacement extended leadscrew
with inch threads
Inch & metric versions
options version with 10-32 tapped tooling
plate style holes in addition to standard T-slots
See a review at www.irritatedvowel.com
Another review at www.davehylands.com
Another customers photos at http://www.acmemachineparts.net//metalwork8.htm
|
|
Standard Sherline table for comparison
 |
| Long travel Y base for
Sherline Mills Made from 6061 T6 Aluminum
Hard anodized for durability
Includes all mounting hardware
18" long for 6" additional travel on 54XX
mills and 4" more on 20X0 mills.
Bolt on upgrade for CNC or manual machines.
Replaces your current base with our 12 lbs monster base.
|
|
 |
| Modular Z axis Riser blocks
for Sherline 5XXX Mills Made from 6061 T6 Aluminum
Hard anodized for durability
Includes all mounting hardware
Each set allows 1.5", 3", and 4.5" of
additional Z clearance
Perfect for extra clearance when using a
rotary table or big bits
|
|
 |
| 2.2" Headstock riser for
Sherline Use to space your headstock out from the
column
Made from 6061 T6 Aluminum
Hard anodized for durability
Includes all hardware
|
|
 |
Tooling Plate for Sherline 4"
x 10" Made from Cast Aluminum Tooling Plate
Hole pattern matches Sherline #3560
Additional holes to fit a Sherline 3701
rotary fixture
Holes tapped 10-32 on standard Sherline
spacing of 1.16"
Includes mounting bolts and genuine
Sherline T-nuts
Tooling Plate for Sherline 4" x 13"
Just like the 10" above, but covers your
entire bed
Additional rows of holes to cover the extra
length
TSlot for a Sherline 3702 90 deg tail stock
Holes tapped 10-32 on standard Sherline
spacing of 1.16"
Includes mounting bolts and genuine
Sherline T-nuts
|
|
 |
| Sherline 3" x 19" tooling
plate for A2Z CNC extended X table Made from Cast
Aluminum Tooling Plate
Hole pattern matches Sherline #3560
Additional holes to fit a Sherline 3701
rotary fixture
TSlot for a Sherline 3702 90 deg tail stock
Holes tapped 10-32 on standard Sherline
spacing of 1.16"
Includes mounting bolts and genuine
Sherline T-nuts
|
|
 |
| 4" x 13" tooling plate for all
Taig mills Made from Cast Aluminum Tooling Plate
Hole pattern matches on 1.16" spacing
Additional holes to fit a Sherline 3701
rotary fixture
TSlot for a Sherline 3702 90 deg tail stock
Fits 2018 or 2019 mill
Includes mounting bolts and nuts
|
|
 |
| Taig 3.5" x 18" tooling plate
for 2019 mills Made from Cast Aluminum Tooling
Plate
Hole pattern matches on 1.16" spacing
Additional holes to fit a Sherline 3701
rotary fixture
TSlot for a Sherline 3702 90 deg tail stock
Covers the entire table on a 2019 standard
or CR mill
Includes mounting bolts and nuts
|
|
|
| Adapter plate to fit a
Sherline 3701 to Taig mill Made from Cast Aluminum
Tooling Plate
Adapts the Sherline 3701 rotary table mount
to fit on Taig's 1" T-slot spacing
Not required if you use our tooling plates
as this function is built in
Includes mounting bolts and nuts
|
|
 |
| Tooling Plate for Mini Mill 4"
x 13" Made from Cast Aluminum Tooling Plate 3/4"
thick
Holes to fit a Sherline 3701 rotary fixture
T-slot for a Sherline 3702 90 deg tail stock
Holes tapped 3/8-16 on 1.625" spacing
Includes mounting bolts
|
|
 |
| Tooling Plate for Chinese
Extended Micro Mill 5.7" X 15.75" Fits a Chinese
micro mill upgraded with the large table from LittleMachineShop.com
Made from Cast Aluminum Tooling Plate 1/2"
thick
Holes to fit a Sherline 3701 rotary fixture
T-slot for a Sherline 3702 90 deg tail stock
Holes tapped 1/4-20
Includes 6mm mounting bolts
|
|
|
Precision Leadscrew Upgrade
for Sherline Mill Precision XY axis upgrade for
Sherline mills using Sherline CNC motor mount systems
Kit includes :
Kerk Motion precision
KerKote treated leadscrews
Kerk Motion NTBF
self-compensating nuts
Replacement Saddle with
Turcite inserts
Motor mount adapters
Complete instructions
Available in inch and metric versions
High lead screws for improved CNC
performance
Standard lead for manual use available by
special order
Visit Kerk
Motion for details on precision leadscrews. |
|
 |
| |
|
|
